Share on Facebook Share on Twitter Share via e-mail Print Share on LinkedIn

Contact - steve@puttfantastic.org.uk                  Tel: 07986 563405             



Tel

Te

On the course

Non infill tee surfacing

On target green

Putting greens

Infill Surfaces

Home putting and Lawns

Golf green

Tees

Fairway

Target greens

Bunkers

Maintaining your surface

Photos

Testemonies

Golf Green site survey


Putt in the park Wandsworth Park

New Top golf conceptual design

Putt Fantastic
Golf Greens Tees Course Impact greens Bunkers Quote survey Green  Maintenance
Home

Specialist constructors Using synthetic grass and new innovations

Golf Course

Golf tees artificial golf green

Super Tee  - How good is this surface

Details: This a 40mm pile height surface with a high stitch rate and density. The upright fibres are held into place by a mass twisted fibres throughout. This in  turn means that a golf tee can held in position like on a regular natural grass tee. The surface does not require infill though we would recommend at least 8 kg per m2 to aid stability and as an aid to initial drainage. The amount of dirt trafficked onto an artificial grass tee is high so the more sand the better. If the sand is filled to within 10mm of the top , then the surface will hold the tee (including long tees)better, will be easier to keep clean and enable spiked tee markers to be secured solidly into place  

 

Tee Surfaces

Tee Strip -

Tee strips are great for driving ranges as the wear and tear is isolated to the tee mats, an artificial grass pad is cost effective and blends in well when laid on natural grass tee areas. The surface is a 15 - 20mm pile height and is infilled with sand at 8 kg per m2. The strip below was installed at brocket hall golf club in 2003 and to my knowledge is still going strong